Summary
This laboratory study tested whether extruding urea with corn slows nitrogen solubilization compared with a simple, unprocessed blend of the same ingredients. Researchers compared a corn and urea mixture with extruded urea (starea) of identical composition (70% urea, 26.8% ground corn, 3.2% sulfur; 200% protein equivalent) using scanning electron microscopy, in vitro nitrogen solubility in water over 360 minutes, and thermogravimetry. Extrusion altered the starch granules and urea crystals into agglomerated structures, produced a slower and steadier nitrogen release, and raised the temperature at which thermal mass loss began. No animals were used.
Key findings
- Under the electron microscope the extruded product appeared as compact, clearly shaped clusters, whereas the plain corn and urea mixture stayed loose and shapeless, with rounded starch granules and urea crystals still visible.
- The unprocessed mixture peaked in nitrogen release within 30 minutes, while extruded urea solubilized more slowly and kept a constant release pattern up to 360 minutes.
- First-stage thermal decomposition began at 136.2 °C for extruded urea versus 103.5 °C for the mixture, with mass loss of about 50.5% versus 54.9%.
- Both products had similar composition, with about 90% of nitrogen in the non-protein fraction A, so differences were attributed to the extrusion process.
Study design
- Animals
- None - laboratory (in vitro) characterization study; no animals were used.
- Treatments
- Two samples with 200% protein equivalent and identical composition (70% livestock urea, 26.8% ground corn grain, 3.2% sulfur flower): the corn and urea mixture before extrusion versus extruded urea (starea, Amireia 200 S). Pure urea and ground corn were also analysed by scanning electron microscopy and thermogravimetry. Nitrogen solubility was measured in water at about 39 °C at 0, 30, 60, 120, 180, 240, 300 and 360 minutes.
Reference
Noemila Debora Kozerski, Luís Carlos Vinhas Ítavo, Camila Celeste Brandão Ferreira Ítavo, Gelson dos Santos Difante, Alexandre Menezes Dias, Lincoln Carlos Silva de Oliveira, Elias Nogueira de Aguiar, Alexandre Guimarães Inácio, Antonio Leandro Chaves Gurgel, Geraldo Tadeu dos Santos. Calorimetry, physicochemical characteristics and nitrogen release from extruded urea. Scientific Reports, 2021, 11:18340. https://doi.org/10.1038/s41598-021-97886-0
Full text
Available in PDF. Download here.
This summary was written by M-Credo AG from the original document. Learn more about the how Amireia 200 S is made and what it guarantees.
